UE Premium Motor Flush helps to keep the inside of the engine clean and oil pan prior to carrying out an oil change. Because of the elongated intervals in changing oil, it increases the build-up of sludge, gums and varnishes inside the engine. Hence, it becomes important to clean the engine once in a while before installation of fresh motor oil.
Where to use (Application)
Fast Engine Cleaner with existing Engine oil
Directions for use
Check crank case to make sure oil is up to safe level. And motor flush to a cold engine before changing oil and filter. Idle engine at a normal rpm for 3 minutes.
Do not drive Two Wheeler. Turn off motor drain crank case and remove filter. Refill with your automotive manufacturers recommended oil to a proper level.
On engines with high mileage or excessive wear remove and clean oil pan before adding new oil. One 60 ml can is sufficient for up to 1 litre of oil.
After adding the product, allow the engine to idle for approximately 1 minute. Then change the oil and the filter
What does it do ?
Protects against oil film break down. Reduces friction on critical engine parts. Helps to improve life of engine components.
Do not expose to heat protect from direct sunlight. For Skin contact wash with mild soap and water. If swallowed do not induce vomiting seek medical attention immediately.